•Technical parameter:
Band width: from 5mm to 1680mm
Maximum operation width:2200mm
Output each workday:2000m~6000m (10mm~35mm)
Maximum roll diameter: Ф280 mm
Blade diameter:Ф400mm
Power :220V/380V, Single phase/ Three phase
Machine dimension(L×W×H):2800×1250×1400mm
Microcomputer programmed data input, visual interface for operation and easy & confortable start up.
Programmed data control, Servo motor drive, accurate size for the needs, five different sizes( toggle between English and metric units) of cutting on the same cloth beam; once the machine is started, it can complete cutting once in a time.
Magic eye for the monitoring of cutting, electronically-tuned cutting rate, electronic transduction for the principal axis of cutter.
Magic eye for the moniorne manual or antomatic knife sharpener and sharpener; the time for pause can be set and the sharpeners can work simultaneously.
English and Chinese operator interface for easy operation by workers from other countries.
Vacuum unit to remove excess trimmed material and sharpening dust.
Automatic shaft resetting system, automatic reutrn to position after loading fabric.
Slitting accurately for different material ( Not only fabric but also some film, polyster etc.
The machine has its own cooling function.
Digital input to set the blade size. setting more accurate
Electronic adjustment of blade moving distance, improve cutting efficiency.
The machine can only be started after lifting
Button “Feed” can control speed.
The parameter can be reserved after emergenay shutdown.
The speed of feeding section can be control separately.